Review Strobius Strobistrip

September 20th, 2022

Review Strobius Strobistrip.

Review of the Strobius Strobistrip

Arriving in a tightly packed box, I had two identical, nylon cylindrical cases. One contained a 50cm Strobius Strip, whilst the second contained a 100cm model.

Review Strobis Strobistrip

After removing the modifiers, the first thing that struck me was the quality of the materials and construction.

strobius strip construction

The diffusion panel seemed quite thin, yet durable, with four lines of stitching providing an extremely strong bond to the main nylon body. This theme of quality and care extended throughout the product.

strobius strip supplied parts

Whilst I was certainly impressed with the workmanship and quality, I wondered just how easy they would be to put together?

strobius strobistrip stitching

There was a clear plastic or acetate sheet which is laid over the inside of the diffusion panel and held in place with corner pockets. Quick and easy. The tricky part was rolling it into a semi circle to be able to anchor the side with the hook and loop strip.


Having now done this several times, I have to say it becomes very easy very quickly. Like folding those infernal wire framed reflectors, it’s easy after the first time. The larger model actually turned out to be a little easier, as the acrylic sheet has a strip of loop material bonded along one edge, which allows the anchoring of the sheet to be quite quick and confident.

strobius strobistrip 50

The Strobius then becomes a tube affair with a flat back. One end is topped off with silver lined end cap, held in place by hook and loop. This leaves the opposite end to take the speedlight of your choice.

Initially, I placed the speedlight in “flat”, in line with the rear panel. I soon realised the weight would cause the head of the speedlight to change position easily. I then rotated the head of the speedlight within the modifier by 90 degrees. This meant the speed light could be clamped with the Strobius in a horizontal position, without the speedlight sinking or suddenly changing position mid shoot.

The fit was surprisingly good, and due to the tension caused by the acetate sheet, worked very well indeed.

So how well does it perform?

Given the fact it is a tube, with the light source at one end, I expected to find a measurable drop in light output at the far end of the modifier, when compared to the edge of the diffusion panel nearest the speedlight. This can actually be seen in the previous image.

How well did it work in a shoot scenario?. I worked with one of my assistants to create a water shot. We set the Strobius 50 frame right, and gel’d it red. The Strobius 100 was set frame left with a blue gel that didn’t completely cover it. The bottom quarter was left uncovered, as it was below the shooting target area.

strobius strobistrip in use

We got the image we wanted, and they worked nicely to create a controlled strip of light over a specific area that could be used for a targeted image.

strobius splash photography

So what of the diffusion abilities, and how usable are they in portraiture. To this end, my assistant and his beard were thrust in front of the camera. And I have to say, I was pleasantly surprised by the results. Yes, they eat a fair amount of the light, but not as much as I expected. The high quality silver reflective lining obviously did its job very well. I set the two Strobius strips either side, and then placed a studio head firing through a 100x100cm softbox as the key light.

strobius use portrait

And the behind the scene shot?

strobius portrait bts

E-M1 1/320th sec ISO200 f8 and both speedlights at 1/8th output.

The Strobius Strips operated far better than I expected, if I were to be honest. They pack small, are quick and easy to assemble, and I feel they actually represent good value for money. I’ve previously paid similar amounts for modifiers made from card. Don’t get me wrong, I still have and occasionally still use those card modifiers. But these Strobius strips are in a different league with regards to the quality of materials, workmanship and the obtainable results. Given the fact I often rely on speedlights for tight situations, or just purely for speed, these are a great addition to my kit, and give me much greater flexibility.

I’m seriously looking at the 150cm model.

Oh, and just as an aside. My main location kit is the ELB 400 and the Strobius Strip doesn’t quite fit the Quadra head. Well, not unless you don’t quite close the hook and loop at the head end, and use a secondary strip of hooks as a fixing strap around the back of the head.

Oh, the possibilities!

The full range is available direct from the manufacturer, at their Strobius Shop.